Masonry cleaners to the rescue
DETERGENTS for new masonry
NMD-80
The NMD-80 is the most efficient, profitable and safe way to clean new masonry. A very powerful detergent-based solution designed for efficient and safe cleaning of efflorescence and excess mortar on the surface, such as bricks, stones, colored blocks, synthetic stones, prestressed and granite.
Cleans without brushing, low pressure application, high pressure rinsing.
Available in 1 gal., 5 gal. and 55 gal. US.
EF-FORTLESS
A soapy solution that melts the powdery bloom and helps
control the return. The user does not have to use a pressure washer to get a good result. This product contains very mild acids and can be used on color sensitive surfaces and will not discolor brick, stone or mortar. A rinse is enough to remove everything.
Covers more or less 75 ft per gallon.
Available in 5 gal. US
Catering products
Restoration Products
ONE-RESTORE
Innovative product for cleaning and maintaining the exterior surfaces of
buildings such as limestone, concrete, brick, glass and windows. Safe and efficient. Does not affect anodized aluminum and does not scratch the glass.
Easy to apply. Spray and rinse, no brushing necessary.
Removes stains caused by weather, pollution, mold and oxidation.
No harm to the skin, little odor.
Available in 5 gal. and 55 gal. US
GSR (Glazed Surface Restoration)
GRS is a very effective detergent without hydrofluoric acid originally
developed to clean glossy brick and terra cotta.
Apply and rinse, cleans brick, concrete and glass.
Do not let the product dry on the surface, rinse thoroughly.
Available in 5 gal. US
For more information on these cleaners see:
4 tips for storing your firewood
Our experts present their 4 simple tips to properly store your firewood and ensure that it stays dry:
1) To facilitate drying, we recommend that you split logs 3 inches and more in diameter;
2) Even commercial firewood is not always split small enough, so it may be useful to split it before stacking it: this will make it easier to dry the logs and feed the fire;
3) Stack the wood in separate rows and out in the open, where the summer sun can warm it and the breeze can rid it of moisture. It is best not to store wet wood in a shed or shed, as it will take much longer to dry;
4) The top of the stack can be covered to protect it from the rain, but leave the sides uncovered so that air can circulate and dry the logs.
Is my wood dry enough?
Usually wood that is cut, split and stack tightly in early spring will be ready for fall. Dense woods like maple or ash, especially large logs, will take longer to dry. A simple way to tell if your wood is dry enough to burn is to split a log: if the center is wet, the wood still needs some time to dry.
Heating with wood all winter: how much do you need?
Eh yes! With the onset of spring, it is also time to buy firewood for next winter and plan for the right amount. Indeed, it is best to get your wood in the spring: since it is not quite dry, you will pay less for it, and you can leave it to dry outside all summer. Check out our tips for storing your firewood while promoting drying by clicking here.
How much firewood should you expect?
It can be difficult to predict how much wood will be needed to heat your home during the cold season, especially if this is your appliance's first winter. The amount you need will depend on the number of days you want to heat with wood. Usually, you can count about one commercial cord (more often called a "cord of wood") per month. So a person who wants to heat 7 days a week will need approximately 7 cords to get through the winter. A commercial cord represents logs 16 inches long, stacked 8 feet long and 4 feet high.
The important thing is to determine approximately how many days per week you plan to heat with your wood appliance! If you are not sure how much wood to buy before winter, our advisors can help you estimate.
The Maçonnex Experts
